EX4200
From Juniper Clue
On this page there are some pictures and some CLI info on the EX-4200:
Pictures
Front view:
Ethernet Ports:
Rear fan tray + Virtual Chasis connector slots
Power supply slots:
The power supplies are universal. the screw down on the left supply is not used when the second supply is installed. the screws are on the supplies directly and lock the latching lever in place.
The hotswapable fan tray:
The power supply:
Inside the power supply slot in the switch:
Virtual Chasis connecting cable:
On the cable there says PCI-e x8
Inside the front UpLink port slot (you can see how the connector looks like):
2 EX4200 connected together as a Virtual Chasis:
Two switches powered on:
CLI info
root@ex4200-1# run show chassis routing-engine
Routing Engine status:
Slot 0:
Current state Master
Temperature 34 degrees C / 93 degrees F
DRAM 1024 MB
Memory utilization 24 percent
CPU utilization:
User 9 percent
Kernel 2 percent
Interrupt 0 percent
Idle 89 percent
Model EX4200-24T, 8 POE
Serial ID XXXXXXXXXX
Start time 2008-05-10 18:35:29 EEST
Uptime 10 hours, 49 minutes, 4 seconds
Load averages: 1 minute 5 minute 15 minute
0.06 0.10 0.13
Routing Engine status:
Slot 1:
Current state Backup
Temperature 42 degrees C / 107 degrees F
DRAM 1024 MB
Memory utilization 24 percent
CPU utilization:
User 8 percent
Kernel 1 percent
Interrupt 0 percent
Idle 91 percent
Model EX4200-24T, 8 POE
Serial ID XXXXXXXXXX
Start time 2008-05-10 18:45:26 EEST
Uptime 10 hours, 39 minutes, 7 seconds
Load averages: 1 minute 5 minute 15 minute
0.02 0.06 0.07
root@ex4200-1# run show virtual-chassis status
Virtual Chassis ID: 0019.e251.9d00
Mastership Neighbor List
Member ID Status Serial No Model priority Role ID Interface
0 (FPC 0) Prsnt XXXXXXXXXXX ex4200-24t 128 Master* 1 vcp-0
1 vcp-1
1 (FPC 1) Prsnt XXXXXXXXXXX ex4200-24t 128 Backup 0 vcp-0
0 vcp-1
Member ID for next new member: 2 (FPC 2)















