ERX-310 for L2TP

From JuniperClue

Remember to include the following commands when using your ERX-310 for L2TP.

router#show tunnel-server
                 Card   Oper     Active      Max
   Port:Appl     Type   State  Interfaces Interfaces Fill
--------------- ------ ------- ---------- ---------------
       Port 2/2 shared present          0       8000 0.0%
   ipsec-tunnel           down          0          0 0.0%
ipsec-transport           down          0          0 0.0%
      gre/dvmrp             up          0       4000 0.0%
           l2tp             up          0       8000 0.0%
    Appl Totals
   ipsec-tunnel                         0          0 0.0%
ipsec-transport                         0          0 0.0%
      gre/dvmrp                         0       4000 0.0%
           l2tp                         0       8000 0.0%
          total                         0       8000 0.0%

router(config)#tunnel-server 2/2 <enter>
router(config-tunnel-server)#max-interfaces all-available <enter>

Also, if you are using a GE2 Line Card and I/O as the Tunnelling Card, ensure that you are running Release 7.0.1 or newer!